Skip to content
Guide

Marble etching: what it is, why it happens and how to fix it

A drop of lemon lands on the countertop, you wipe it up, and the next day you see a dull mark in the light that will not go away. It is not dirt: the acid has eaten into the surface. Here is why it happens and how to fix it.

What etching actually is

Marble is made of calcite (calcium carbonate). Acids react with it and dissolve a very thin layer of the surface. Where it was polished, you are left with a dull, lighter or slightly rough spot. That is etching.

It is not a stain: nothing has gone into the stone; a little stone has gone. That is why no cleaner will remove it.

The usual culprits

Etch or stain?

How to remove etch marks

Light etching on polished marble

You can treat it at home with a marble polishing powder (sold by stone-care suppliers):

  1. Clean the area and dampen it slightly.
  2. Sprinkle a little powder and rub with a damp cloth, or with a buffing pad on a drill at low speed, in circular motions.
  3. Keep going until the mark regains its shine. Rinse well and dry.

Try it on a small mark first. If the treated area starts to look different from the rest, stop and call a professional.

Deep or large etching, or honed marble

This is a job for a stone restoration professional. They hone the area with progressively finer abrasive pads and restore the finish (polished or honed) on site. The countertop ends up looking new, something most manufactured surfaces cannot offer.

How to prevent etching

What if I don't want to worry about it?

There are two ways. Accept that marble develops a patina over the years, like in classic Italian kitchens, or choose a stone that does not react with acids, such as quartzite. We help you decide in marble vs quartzite, and you can browse quartzites that look like marble.

Have a project in mind?

Ask us for a no-obligation quote: we will reply with an indicative price.